Dental Mold
This is a high strength resin for dental mold. It has good tensile strength and impact strength. High printing accuracy, details restore clear. Its printed product has a super hard surface effect, and a long time stable storage. This material is very suitable for the production of all kinds of dental mold.
Type: D002 / D002-6 / D002-8
Color: Beige / Pink / Grey
EXP: 12 Months

        Dental Mold

                   

                  
•  High surface strength                         •  High accuracy                         •  High speed

                  •  Excellent stability                                 •  Rich color variety



   
                  Product Data Sheet

Liquid Properties

Appearance

Beige / Pink / Grey

Viscosity

400-500 cps@25℃



Mechanical Properties

Measurement

GB Method

Value

Tensile strength

GB/T 1040.1-2006

50-60 MPa

Elongation at Break

GB/T 1040.1-2006

5-12 %

Hardness, C.T.E.Shore D 

GB/T 2411-2008

81-87 D

Glass transition


DMA,tanθ peak


105 ℃



                Storage conditions, expiry date and transport 

                Store the product in the original packaging at room temperature in a dry and dark area, preferably not exceeding 25℃.

                Close the packaging after each use. The expiry date of the product is mentioned on the product label. In case of exceed-

                ing the expiry date, the product is no longer guaranteed in terms of treatment. Do not expose to UV-light and moisture.


Previous : Planting Guide
Tel:
0571-88721751
WECHAT
浙ICP备18035406号-1
Powered by Feedback analysis